
HPS-120 POWER SUPPLY
Power Supply
General Features
Fixed Output Voltage
Fixed Output Current
Low Cost
High Reliability
Overload Protection
Overvoltage Protection
Short Circuit Protection
100% Full Load Test
Rail Mounting
LED Indicator for Power
CE Approved according to EN Standards
Voltage Range: 100 ile 240VAC, 127 ile 370VDC 50/60Hz
AC Current: AC100-240V 2.6A / DC127-370V 1.4A
Efficiency: 86%
Inrush Current: 115VAC 16A / 230VAC 32A
Leakage Current: <1mA/240VAC
DC Voltage: 24VDC
Rated Current: 5A
Current Range: 0-5A
Rated Power: 120W
Ripple and Noise: 100Mv
Voltage Adjustment Range: -10% to 15%
Voltage Tolerance: ±1.0%
Setup and Rise Time: 1000ms, 60ms at full load/230VAC 1800ms, 60ms/ 115VAC
Hold Up Time: 115VAC 27ms / 230VAC 128ms
Overload: 120% to 150% of rated load current
High Voltage: YWS*5
Vibration: Vibration values at 0.375 mm single amplitude for 2 hours in each of the X, Y, and Z directions at 10~55 Hz. 10 to 150 Hz, 0.35 mm single amplitude for 80 minutes in each of the X, Y, and Z directions (maximum 5 G for 60W, 120W, 240 W).
Operating Temperature and Humidity Values: -25℃~+60℃; 20%~90%RH
Storage Temperature and Humidity Values: -10℃~+60℃; 10%~95%RH
Withstand Voltage: I/P-O/P: 3KVAC I/P-FG: 2.0KVAC O/P-FG: 0.5KVAC
Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
Safety Standard: EN62368-1
EMC Standardı: EN55032,EN55035,EN61000-3-2,EN61000-3-3
Width: 40 mm
Height: 125 mm
Depth: 124 mm
Weight: 550g
