HPS-480 POWER SUPPLY
Power Supply
General Features
Fixed Output Voltage
Fixed Output Current
Low Cost
High Reliability
Overload Protection
Overvoltage Protection
Short Circuit Protection
100% Full Load Test
Rail Mounting
LED Indicator for Power
CE Approved according to EN Standards
Voltage Range: 100 to 240 VAC, 90 to 350 VDC (allowed range: 85 to 264 VAC)*6
AC Current: AC100-220V 5.2A / DC90-350V 2.8A
Efficiency: 86%
Inrush Current: 115VAC 16A / 230VAC 32A
Leakage Current: <1mA/240VAC
DC Voltage: 24VDC
Rated Current: 20A
Current Range: 0-20A
Rated Power: 480W
Ripple and Noise: 240Mv
Voltage Adjustment Range: -10% to 15%
Voltage Tolerance: ±1.0%
Setup and Rise Time: 1000ms, 60ms at full load/230VAC 1800ms, 60ms/ 115VAC
Hold Up Time: 115VAC 24ms / 230VAC 24ms
Overload: 105% to 150% of rated load current
High Voltage: 30-36V
Vibration: Vibration values at 0.375 mm single amplitude for 2 hours in each of the X, Y, and Z directions at 10~55 Hz. 10 to 150 Hz, 0.35 mm single amplitude for 80 minutes in each of the X, Y, and Z directions (maximum 5 G for 60W, 120W, 240 W).
Operating Temperature and Humidity Values: -10℃~+70℃; 20%~90%RH
Storage Temperature and Humidity Values: -20℃~+85℃; 10%~95%RH
Withstand Voltage: I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMC Standard: EN55011,EN55022,EN61000-3-2,-3,EN61000-4- 2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2(EN50082-2)
Width: 86 mm
Height: 131 mm
Depth: 138 mm
Weight: 1300g